Tuesday 3 November 2015

How to make a stencil with the Big Shot




 Hi friends!

Usually we use our Big Shot to cut all kinds of objects and decorations, and We also saw how to make foam stamps, but ... you can use our dies to make a stencil? The answer is yes! With a little trick we can do stencils with our Sizzlits dies, even those with several closely spaced shapes.

You need:


  1. Cut the piece of vinyl that we will use, considering that it should be a margin around the figure to not dirty with the paint. Place on the die, with the vinyl side down, and cut.  
  2. Cover with masking tape (in the vinyl side) all the cuts that have been around that are not the chosen figure. Remove the vinyl die from the central figure.  
  3. When we want to use the stencil, simply remove the paper protecting from the adhesive part of the vinyl and paste our stencil in the desired position. With a sponge or stiff brush loaded with little paint we tapped on the stencil, remove, and voila!


We can use the stencil several times, while the adhesive keeps sticking and small parts do not break. I used it to decorate a Christmas ornament: felt gloves with winter motives.


What do you think? Easy right? Until next week with a new tutorial!

////////////////////////////////////////////////////////////

Ciao amici!

Siamo abituati ad usare la nostra Big Shot per tagliare ogni genere di oggetti e decorazioni, e abbiamo anche imparato ad usarla per fare dei timbri di gomma crepla, ma... possiamo usare le nostre fustelle per fare degli stencil?

La risposta è si! Con un piccolo trucco possiamo fare delle mascherine con le nsotre fustelle Sizzlits, anche con quelle che hanno diverse forme molto vicine.

Materiali
Tagliare un pezzo di vinile, tenendo conto che ci deve essere un margine tutto attorno alla figura del nostro stencil per non sporcare la superficie che andremo a stampare.

Mettere il pezzetto di vinile sulla fustella, con la parte del vinile rivolta verso il basso, e tagliare. Usare il nastro per coprire tutte le parti attorno alla nostra figura che sono state tagliate dalle figure confinanti e invece non ci servono, mettendo il nastro dal lato del vinile.

Quando vogliamo usare lo stencil, semplicemente togliamo la carta protettiva e incolliamo nella posizione desiderata. Con una spugnetta o un pennello duro e poca vernice, diamo dei colpetti sullo stencil, ritiriamo, et voilà!

Gli stencil si possono usare diverse volte, finché l'adesivo incolla ancora. Io ho fatto un guanto per Natale con dei motivi invernali, che ne pensate?

Fatto! Molto semplice vero? Ci vediamo il prossimo martedì con un altro tutorial!


////////////////////////////////////////////////////////////

Hola amigos!

Estamos acostumbrados a usar nuestra Big Shot para cortar todo tipo de objetos y decoraciones, y también hemos visto cómo usarla para hacer sellos de goma eva, pero... ¿es posible usar nuestros troqueles para hacer stencil?

 La respuesta es sí! Con un pequeño truco podremos hacer stencil con nuestros troqueles Sizzlits, aun los que tienen varias formas muy juntas.

 Materiales

Cortar el trozo de vinilo que vamos a utilizar, teniendo en cuenta que debe quedar un margen alrededor de la figura para no ensuciar al pintar.

Colocarlo sobre el troquel, con el lado del vinilo hacia abajo y cortar. Cubrir con cinta de carrocero, del lado del vinilo, todos los cortes que hayan quedado alrededor que no son el de la figura elegida.
Retirar el vinilo troquelado de la figura central.

 Cuando queremos usar el stencil, simplemente quitamos el papel que protege la parte adhesiva del vinilo y pegamos nuestro stencil en la posición deseada. Con una esponja o un pincel duro cargados con poca pintura damos golpecitos sobre el stencil, retiramos, y listo!

 Podemos usar el stencil varias veces, mientras el adhesivo siga pegando y las partes pequeñas no se rompan. Yo lo he usado para decorar un adorno de Navidad, unos guantes de fieltro con motivos invernales.

¿Qué os parece? ¡Hasta la próxima!

No comments:

Post a Comment